FEETECH Ultra-High-Torque, High-Voltage Digital Giant Servo FT5335M

FEETECH Ultra-High-Torque, High-Voltage Digital Giant Servo FT5335M

CHF46.38

The FEETECH FT5335M servo is all about torque. This 1/4-scale digital servo can deliver an incredible 550 oz-in of torque at 7.4 V or 480 oz-in at 6 V thanks to its powerful motor and all-metal gear train. The FT5335M is a high-voltage servo, offering an operating voltage range of 6 V to 7.4 V. Servo horns and associated hardware are included. This servo can work with both 5 V and 3.3 V servo signals.

Quantity
In Stock

The FT5335M is a giant-scale (also called 1/4-scale or mega-scale) digital servo from FEETECH that can deliver more than twice the torque of our strongest standard-size servo, offering up to 550 oz-in at 7.4V or 480 oz-in at 6 V (if you need even more torque than this, check out the much larger Torxis monster servos, and if you need a lot of torque in a smaller size or with more speed, consider the FT5121M and FT5313M high-torque digital servos). The picture on the right shows how the giant-size FT5335M compares to a standard-size servo.

The FT5335M works with standard RC servo pulses, providing a running angle of approximately 120° over a servo pulse range of 900 µs to 2100 µs. Many hobby servos can be operated beyond their standard ranges by using a wider pulse range, but please note that in our tests, we were not able to expand the range of the FT5335M significantly beyond 120° (the servo did not respond to pulses below around 900 µs or above around 2100 µs).

This servo has a 12″ (30 cm) cable that is terminated with a standard Futaba J connector. Unlike typical hobby servos, the FT5335M has an operating voltage range of 6 V to 7.4 V.

Dimensions:

Size: 62.8 × 32.5 × 55.9 mm
Weight: 180 g

General specifications:

Digital?: Y
Speed @ 7.4V: 0.18 sec/60°
Stall torque @ 7.4V: 40 kg·cm
Speed @ 6V: 0.20 sec/60°
Stall torque @ 6V: 35 kg·cm
Hardware included?: Y
Lead length: 12 in
PO-3429

Specific References

8 other products in the same category: