TB67S249FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)

TB67S249FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)

CHF12.02

This version of our TB67S249FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. The TB67S249FTG has a wide operating voltage range of 10 V to 47 V, and our carrier board can deliver approximately 1.6 A per phase continuously without a heat sink or forced air flow (up to 4.5 A peak).

Quantity
In Stock

This version of our TB67S249FTG Stepper Motor Driver Compact Carrier ships with male header pins installed as shown in the main product picture, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard.

Dimensions:

Size: 0.6″ × 0.8″
Weight: 2.6 g

General specifications:

Motor driver: TB67S249FTG
Minimum operating voltage: 10 V
Maximum operating voltage: 47 V
Continuous current per phase: 1.6 A
Maximum current per phase: 4.5 A
Minimum logic voltage: 2 V
Maximum logic voltage: 5.5 V
Microstep resolutions: full, non-circular 1/2, 1/2, 1/4, 1/8, 1/16, 1/32
Current limit control: potentiometer
Reverse voltage protection?: N
Header pins soldered?: Y

PO-3097

Specific References

You might also like

16 other products in the same category: