50:1 Micro Metal Gearmotor HP 6V

50:1 Micro Metal Gearmotor HP 6V

CHF15.74

This gearmotor is a miniature high-power, 6 V brushed DC motor with a 51.45:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.

Quantity
In Stock

These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-power 6 V and 12 V motors with long-life carbon brushes (HPCB), and high-power (HP), medium power (MP), and low power (LP) 6 V motors with shorter-life precious metal brushes. The 6 V and 12 V HPCB motors offer the same performance at their respective nominal voltages, just with the 12 V motor drawing half the current of the 6 V motor. The 6 V HPCB and 6 V HP motors are identical except for their brushes, which only affect the lifetime of the motor.

With the exception of the 1000:1 gear ratio versions, all of the micro metal gearmotors have the same physical dimensions, so one version can be easily swapped for another if your design requirements change.

Dimensions:

Size: 10 × 12 × 26 mm
Weight: 9.5 g
Shaft diameter: 3 mm

General specifications:

Gear ratio: 51.45:1
No-load speed @ 6V: 590 rpm
No-load current @ 6V: 0.07 A
Stall current @ 6V: 1.6 A
Stall torque @ 6V: 0.86 kg·cm
Max output power @ 6V: 1.3 W
Extended motor shaft?: N
Motor type: 1.6A stall @ 6V (HP 6V)
PO-0998

Specific References

Customers who bought this product also bought:

16 other products in the same category: