150:1 Micro Metal Gearmotor HPCB 6V

150:1 Micro Metal Gearmotor HPCB 6V

CHF18.52

This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 150.58:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.

Quantity
In Stock

These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-power 6 V and 12 V motors with long-life carbon brushes (HPCB), and high-power (HP), medium power (MP), and low power (LP) 6 V motors with shorter-life precious metal brushes. The 6 V and 12 V HPCB motors offer the same performance at their respective nominal voltages, just with the 12 V motor drawing half the current of the 6 V motor. The 6 V HPCB and 6 V HP motors are identical except for their brushes, which only affect the lifetime of the motor.

The HPCB versions can be differentiated from versions with precious metal brushes by their copper-colored terminals. Note that the HPCB terminals are 0.5 mm wider than those on the other micro metal gearmotor versions (2 mm vs. 1.5 mm), and they are about 1 mm closer together (6 mm vs. 7 mm).

Dimensions:

Size: 10 × 12 × 26 mm
Weight: 9.5 g
Shaft diameter: 3 mm

General specifications:

Gear ratio: 150.58:1
No-load speed @ 6V: 220 rpm
No-load current @ 6V: 0.10 A
Stall current @ 6V: 1.5 A
Stall torque @ 6V: 2.0 kg·cm
Max output power @ 6V: 1.1 W
Extended motor shaft?: N
Long-life carbon brushes?: Y
Motor type: 1.5A stall @ 6V (HPCB 6V - carbon brush)

Performance at maximum efficiency:

Max efficiency @ 6V: 31 %
Speed at max efficiency: 170 rpm
Torque at max efficiency: 0.41 kg·cm
Current at max efficiency: 0.39 A
Output power at max efficiency: 0.73 W
PO-3066

Specific References

16 other products in the same category: