1000:1 Micro Metal Gearmotor MP 6V with Extended Motor Shaft

1000:1 Micro Metal Gearmotor MP 6V with Extended Motor Shaft

CHF24.09

This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 986.41:1 metal gearbox, making it a great choice for applications requiring fine control at very low speeds. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.

This version also has a 4.5 × 1 mm extended motor shaft.

Quantity
In Stock

These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-power 6 V and 12 V motors with long-life carbon brushes (HPCB), and high-power (HP), medium power (MP), and low power (LP) 6 V motors with shorter-life precious metal brushes. The 6 V and 12 V HPCB motors offer the same performance at their respective nominal voltages, just with the 12 V motor drawing half the current of the 6 V motor. The 6 V HPCB and 6 V HP motors are identical except for their brushes, which only affect the lifetime of the motor.

Dimensions:

Size: 10 × 12 × 29.5 mm
Weight: 10.5 g
Shaft diameter: 3 mm

General specifications:

Gear ratio: 986.41:1
No-load speed @ 6V: 22 rpm
No-load current @ 6V: 0.04 A
Stall current @ 6V: 0.67 A
Stall torque @ 6V: 6.5 kg·cm
Extended motor shaft?: Y
Motor type: 0.67A stall @ 6V (MP 6V)

Performance at maximum efficiency:

Max efficiency @ 6V: 24 %
Speed at max efficiency: 17 rpm
Torque at max efficiency: 1.3 kg·cm
Current at max efficiency: 0.16 A
Output power at max efficiency: 0.23 W

Note: stall torque and current specifications are theoretical values; stalling the motor will damage the gearbox.

PO-3059

Specific References

16 other products in the same category: