Filter By

Brand

Brand

Connectors

Connectors

Connectors

Subcategories

Active filters

  • CHF4.60

    This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter solves the problem with a RP-SMA jack on one end and an SMA Plug on the other.

  • CHF4.60

    This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter solves the problem with an SMA jack on one end and an RP-SMA Plug on the other.

  • CHF2.09

    Simple shrouded 10-pin connector. Good for preventing cable connection mishaps. Use for programming, data, power, or any other kind of connection. 2x5 pins on 0.1" centers.

  • CHF9.24

    A simple solder cup DB25 connector. Use this on PCBs as an edge mount connector for parallel port devices (programmers, stepper motor drivers, etc).

  • CHF2.27

    These are small spring terminals. Open the aperature with the small arm, insert the wire, release the arm and the wire is held firmly in place. This is a good quick way to to interface to bare wires. Capable of higher current and more resilient than breadboard or female header type connections.

  • CHF2.55

    These are small spring terminals. Open the aperature with the small arm, insert the wire, release the arm and the wire is held firmly in place. This is a good quick way to to interface to bare wires. Capable of higher current and more resilient than breadboard or female header type connections.

  • CHF2.09

    These are small spring terminals. Open the aperature with the small arm, insert the wire, release the arm and the wire is held firmly in place. This is a good quick way to to interface to bare wires. Capable of higher current and more resilient than breadboard or female header type connections.

  • CHF1.81

    These are small spring terminals. Open the aperature with the small arm, insert the wire, release the arm and the wire is held firmly in place. This is a good quick way to to interface to bare wires. Capable of higher current and more resilient than breadboard or female header type connections.

  • CHF1.62

    Screw Terminals with 5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems).

  • CHF2.55

    This Mini-USB adapter features a USB Type-A plug on one end (the kind you would plug into a computer) and a USB Mini-B plug on the other. It is great for projects where a long cable between your computer and USB slave device is unnecessary.

  • CHF2.46

    These stackable 0.1" (2.54 mm) female headers are just the right height for connecting Arduino shields to Arduinos and other shields. The set includes two 1×6 female headers, two 1×8 female headers, and one 1×10 female header, so it has everything necessary for both old- and new-style shields.

  • CHF0.60

    This connector is a double-row, 6-pin (2×3), straight female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.