Home

Active filters

  • CHF9.24

    Storage bag for your charging cable.

  • CHF23.17

    This powerful synchronous switching step-down (or buck) regulator takes an input voltage of up to 50 V and efficiently reduces it to 9 V. The board measures only 1″ × 1″ yet delivers typical maximum continuous output currents between 2.7 A and 7 A, depending on the input voltage, which makes it well suited for powering moderate to large loads. An optional enable input with a precise cutoff threshold can be used to put the regulator in a low-power state with a current draw of 10 µA to 20 µA per volt on VIN. The regulator also features reverse voltage protection and a power-good output that indicates when the regulator cannot adequately maintain the output voltage.

  • CHF4.60

    These tall brackets offer an easy and convenient mounting solution for our mini plastic gearmotors. The white plastic bracket securely clasps around the gearmotor, and the mounting tabs capture the nuts for easy installation. These brackets are sold in pairs, and each bracket comes with two M3 screws, two nuts, and a spacer.

  • CHF18.52

    This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36 V and efficiently reduces it to 12 V.

    The board measures only 0.7″ × 0.7″ yet delivers typical continuous output currents between 1.4 A and 2.2 A, depending on the input voltage, which makes this regulator well suited for powering moderate loads like sensors or small motors.

    An optional enable input can be used to put the regulator in a low-power state with a current draw of 5 µA to 10 µA per volt on VIN.

    The regulator also features reverse voltage protection and a power-good output indicates when the regulator cannot adequately maintain the output voltage.

  • CHF18.52

    Magnet mount antenna for GPS modules operating at 3V.

    Designed for used with automobiles - the magnet will hold the antenna in place at speeds greater than 100mph.

    5meter cable terminated with MCX connector.

  • CHF20.38

    Use this motor driver and power distribution board to get your Romi chassis running quickly.

    It offers all of the same features as the smaller Power Distribution board for Romi Chassis — battery contact slots, reverse voltage protection, several power switching options, and easy access to the various power busses — and adds a two-channel motor driver and powerful switching step-down regulator that can supply a continuous 2.5 A at 5 V or 3.3 V. Just add a microcontroller and sensors to complete your Romi robot.

  • CHF20.38

    Would you like to add powerful and easy-to-use Bluetooth Low Energy to your robot, art or other electronics project? With BLE now included in modern smart phones and tablets, its fun to add wireless connectivity.

  • CHF20.38

    The A-Star 32U4 Mini LV is a programmable module based on the ATmega32U4 from Microchip (formerly Atmel). Unlike competing products, it has an on-board switching step-up/step-down regulator that allows it to be powered efficiently from a 2.7 V to 11.8 V supply. This compact 1.9″ × 0.7″ board breaks out all 26 of the microcontroller’s I/O pins (of which 7 can be used as PWM outputs and 12 as analog inputs), and loading programs is made easier by a Micro-USB interface and a preloaded Arduino-compatible bootloader.

  • CHF20.38

    Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly!

    Adafruit designed Feather to be a new standard for portable microcontroller cores. This is the Feather 32u4 Basic Proto, it has a bunch of prototyping space built right in.

  • CHF32.45

    This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 30 V voltage range and is efficient enough to deliver a continuous 17 A without a heat sink. Additional features of this second-generation (G2) driver include reverse-voltage protection along with basic current sensing and current limiting functionality.

  • CHF21.31

    The six-channel Micro Maestro raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want high-performance servo control (0.25 μs resolution with built-in speed and acceleration control) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this tiny, versatile device will deliver.

    Header pins are included but not soldered into this partial kit version (all surface-mount components are soldered).

  • CHF7.66

    The HD-1900A analog servo from Power HD is a great general-purpose micro servo. Servo horns and associated hardware are included.